Manufacturing method and maintenance of folding tabletop

- Jun 18, 2020-

Folding table manufacturers say that the products produced are favored by the majority of users because of their novel ideas, new structure, easy folding and storage, and no space, etc., especially for small space families and outdoor enthusiasts. How is the tabletop made?

The appearance and quality of the folding table products place strict requirements on the board used. First, cut the wood into cubes, then use a multi-piece machine to cut the cube into small pieces of core strips, insert the core strips in the center of the plate, and use the machine to put The core strip is assembled into a large template, and the two sides are covered with a layer of approximately 2mm middle skin, attached to the top and bottom of the core strip, and the template is sanded to make the surface flat. Then, press a layer of epidermis on the surface of the middle skin to complete the production of the entire desktop.

Although the manufacturing method is relatively simple, the following maintenance work should also be done during the use:

1. When conditions permit, users can regularly wax the desktop Jining, because it is both beautiful and can also play a role in water protection.

2. The desktop is made of wooden materials, so you must not pour it directly on the desktop with water or wipe it directly with a rag with water because it is easy to cause expansion damage to the desktop.

3. When performing maintenance, first clean the oil stains on the desktop with a semi-dry rag with detergent, and then wipe it clean with a dry rag, which can extend its service life.