Maintenance points for folding tables

- Sep 18, 2019-

Desktop maintenance

The surface of the folding table is a fireproof board or a forming board. The periphery is made of plastic strips or aluminum alloy strips. Do not directly pour it on the table with water or wipe it directly with a cloth with water. This is very easy to cause the edge of the table. Inflation and damage to the water. When cleaning, first clean the table oil with a semi-dry cloth with detergent, then wipe it off with a dry rag. In order to prolong the service life, please have the car hit the table every 1-3 months. Wax (available at the car shop) is beautiful, and it can avoid water and extend the life of the desktop.

Table leg care

The steel pipe used for folding the table legs is usually used to save trouble when the waiter mops the floor. It is not directly wiped to the wall of the steel pipe. It will not be wiped out in time. Over time, it will become rusty and remind customers:

1. After mopping the floor, be sure to dry the water trace on the surface of the steel pipe with a dry cloth, and then spray it with car wax or rub the sewing machine oil;

2. Usually, all kinds of steel pipe legs are stained with oil, and can be wiped clean with a dry rag. Be careful not to scratch the surface.

Do not use rough and sharp materials to scrub the surface of the steel pipe, especially the mirror light should be scrubbed with a softer fabric that is not easy to fall off;

3. Prevent the use of bleaching ingredients such as: 84

Cleaning agent and abrasive washing liquid, steel ball, grinding tool, etc., in order to avoid residual washing liquid, corrode the appearance of the steel pipe, wash the surface with clean water at the end of washing, and then spray car wax or rub the sewing machine oil to maintain;

4. The outer surface of the steel pipe is dusty and easy to remove the dirt. It can be washed with soap, weakly washed, and the binder component is scrubbed with alcohol or organic solvent (ether, benzene). The outer surface of the steel pipe has bleach and various acid adhesions. Rinse with water, dip with ammonia solution or neutral carbonated soda aqueous solution, wash with neutral detergent or warm water, wash and dry with spray wax.