According to the wholesalers of outdoor folding tables, the maintenance of folding tables is currently divided into two aspects, one is desktop maintenance, and the other is table leg maintenance. However, there are some things to pay attention to when maintaining different parts:
Desktop maintenance. The surface of the folding table is a fire-resistant layer or a molding board. The periphery is made of plastic strips or aluminum alloy strips. Do not directly use water on the tabletop or wipe it with a rag with water. This is very easy to cause. The edge of the tabletop is swollen and damaged due to water. When maintaining, first clean the tabletop with a semi-dry cloth with detergent, and then clean it with a dry rag.
The maintenance of the table legs, the steel pipe used for the table legs of the folding table is usually dragged directly to the wall of the steel pipe in order to save trouble when mopping the floor, and it is not dried in time. Over time, it will become rusty. So you should pay attention to four issues:
1) The surface of the steel pipe is dusty and easy to remove dirt. It can be washed with soap and weak washing. The binder component can be washed with alcohol or organic solvents.
2) Do not use rough and sharp materials to scrub the surface of the steel pipe, especially the mirror light, use a softer, non-falling cloth to scrub.
3) In general, after the steel legs of various types of steel tables are stained with oil, they can be cleaned with a dry rag, taking care not to scratch the surface.
4) After mopping the floor, wipe the watermarks on the surface of the steel pipe with a dry cloth in a timely manner, then spray car wax or wipe the sewing machine oil for maintenance.